VEVOR Armoire de sablage, 40 gal armoire de sablage portable 40 à 120 psi, sableuse en acier robuste avec pistolet de sablage et 4 buses en céramique pour enlever la peinture, les taches et la rouille

Comes completely disassembled so you'll need a little know how to set it up. Instructions are a little vague but I was able to work through it. The sides of the box didn't quite wanna fit but I finally got them together after trying a few different ways. Ended up using a long clamp to pull them inline to get the screws in. Everything else seemed to go together fine. There was lots of scratching on the hopper from something coming loose in the box it came in and I noticed a couple of small spots in the paint that were factory caused. Make sure you use the gasket sealant on everything except the foam seals. Also the sealant tube burst on the bottom end but I just used my finger to smear it on...I've seen a couple of videos of this happening and after a bit you can just roll the bottom up a bit. Light is plenty bright for me. I also built a wooden stand for it out of scrap lumber. The air filter for exiting air seems like it would clog up a lot so I made up a vacuum attachment and ran the hose down to a homemade 5 gallon pail cyclone and then up to the vacuum. Works really well and keeps the dust down to a minimum when blasting. Unit seems to work really well for what I use it for, small parts here and there. I'm using glass media 30-60 grit. Unit was about 99% sealed when in use...tiny bit of dust in the air after blasting. I had to add a proper air compressor line attachment to the side hole. I'm running it with a 5hp 15 gallon compressor but for continuous use it would need something a little bigger I think. Overall seems to be a very good buy.

Having used larger units in industry, I honestly wasn’t expecting much. I also wasn’t sure how well my smallish 5.3cfm@90psi/6.7cfm@40psi compressor would keep up but it does just fine. I don’t have to stop and let the compressor catch up any.The instructions were clear enough, all the hardware was already sorted and labeled. It arrived well packaged and with no damage.At 50 psi it does a great job with 80 grit glass beads. The trick is use the least pressure you can or you will quickly turn your beads into dust.Imho, a cyclone dust separator and a water/oil filter are required accessories. My cabinet seals up well enough that when I kick on my shop vac I can’t open the door from the pressure differential. The cyclone dust separator is very effective at capturing the dust before it ever reaches the shop vac.I used the Woodstock W1042 2-1/2-Inch Universal Dust Port from Amazon mounted with double sided tape to facilitate the use of the dust collection system.I also sourced the NANPU 1/4" NPT Compressed Air Line Filter, 5 Micron Element, Bracket, Poly Bowl, 145 psi from Amazon. I have it mounted at the cabinet and it does a good job of preventing any condensation from contaminating the beads.I use 80 grit glass beads that I source locally.I am very satisfied with the product quality, performance and durability, especially at this price point.

Works ok but the way media returns could work better. The screen deforms as well

Die Kabine funktioniert hervorragend!Ich habe beim Aufbau zusätzlich (hochwertigeren) Dichtkleber verwendet, um wirklich alles dicht zu kriegen. Zusätzlich betreibe ich die Kabine nicht mit dem mitgelieferten Filter, sondern mit einer Absaugung bestehend aus Werkstatt-Sauger und Doppel-Zyklonabscheider.Als Strahlmittel wird 0.2-0.8mm Schlacke verwendet.Bin vom Ergebnis absolut begeistert!Für jeden, der ein altes Moped restaurieren, oder gerne etwas umlackieren möchte geradezu ideal.

👍👍👍👍👍👍👍